Polishing and cleaning faucets 15 effective tricks

Cleaning the faucets can make a huge difference to the look of the kitchen or bathroom, as it makes it look sparkling by following the bathroom cleaning tips to get the results you want. This is because faucets, like other items in the home, do not stay clean forever and eventually build up dirt on them. In addition, it becomes vulnerable to microbial growth and some types of microbes that have a negative effect on faucets, leading to the appearance of surface spots and unpleasant odors. Since the faucets pump hot water regularly, this leads to a humid and hot environment in which microbes grow. Since the conditions are suitable, multiple numbers of microbes can grow, whether in the kitchen or bathroom surfaces. Although microbial contamination is a problem at home, it is a serious problem when it is in public areas such as hospitals and public toilets because it can easily transfer microbes that grow on the surface of faucets and spread to the general public if the drains are left unclean.

Cleaning the faucets can be difficult when you think about it, but gradually it will become easier. However, leaving them unclean for long periods of time can become very dull and increase the chances of contamination with microbes. Sometimes you resort to using unsuitable detergents, which make the cleaning process not easy for you, but it is necessary to ensure that the faucets are clean so that the kitchens do not look dirty and increase their brilliance again. We have collected these tips and steps that help you clean the faucets easily.

Polishing and cleaning faucets

white vinegar:

White vinegar is very effective in cleaning and provides you with impressive results in cleaning the faucets to get rid of limescale on the faucets. Through the use of a mixture of white vinegar with water. Mix half a cup of white vinegar with half a cup of water. At first, soak a paper towel or a clean rag soaked in this liquid and wrap it around the faucet. Cover the faucet with a plastic bag and let the mixture work for at least an hour. Then create a roll and using an old toothbrush you can scrub the faucet. Try to rinse the faucet with plenty of water and dry it. This method helps you to get good results to get rid of lime stuck on the faucets

2. Ethyl alcohol for sparkling faucets:

Ethyl alcohol contains ethanol, which is a great disinfectant and an effective cleaner that can be easily obtained for cleaning the house and becomes a very effective option for cleaning faucets.

All you need is to soak a towel from this liquid and rub the tap with it. You will notice that the limescale accumulated around the tap will disappear easily and disappear until the tap returns to its brilliance again.

3. Flour:

Flour will help you remove faucet stains and make the faucet look clean and shiny. This trick produces a lot of wonderful results that you are looking for when the faucet is completely dry, then sprinkle flour on the faucet and take a piece of cloth to massage the faucet and rub it until the faucet lights up and returns to its normal position. Clean and shiny, and the stains on the faucet disappear.

 4. Toothpaste:

In addition to ensuring that you get wonderful and shiny teeth, toothpaste is used to get a clean and shiny faucet. What you need is to apply toothpaste to all surfaces of the faucets. Scrub well with a soft towel before rinsing.

5. Don’t forget to clean the faucet filters:

If you live in areas with hard water, tap filters are likely to be used. If this is the case, lime will build up, especially with the pressure of the water. Take out the filter and immerse it in a mixture containing equal amounts of hot water and vinegar. If any lime remains on the filter, you can get rid of it by using a needle to wash the filter well and put it back in its original place.

6. Knowing the very tap:

Before using any cleaning product, you need to familiarize yourself with the type of your faucet to know the appropriate chemicals to clean it. The manufacturer may need to obtain certain cleaning tools and recommends the use of a specific type of sponge instead of a brush, as it is not suitable for all types.

7. Prepare a solution of soap and warm water:

If your faucet is not very dirty, using soap and warm water and soaking a clean cloth will help you keep the faucet clean easily, especially with repeating these simple steps, you simply rub the faucet with liquid and then dry with a dry towel to ensure its shine.

8. Baking soda:

Baking soda is used to organize many places in the house because it guarantees you to get good results. We recommend that you apply a small amount of baking soda to an old toothbrush, add a very small drop of water, and rub the solution around the faucet with a toothbrush to remove bad stains.

9. Fresh lemon juice:

You can prepare fresh lemon juice and it gives the same effect as a bottle of chemicals. Soak cotton in fresh lemon juice, then wipe well around the tap and leave it to soak for one hour. Using an old toothbrush, you can scrub the tap well and rinse. You may need to wipe with a towel to see results quickly.

10. Borax and Salt Mixture:

When you make a mixture of baking soda with sea salt, borax powder, and a few essential oil it helps clean the tap. It is a mixture that includes simple ingredients that eventually give a strong powder that is sprinkled around the tap when you need a deep cleaning and left for 5 minutes until it reacts and using a brush you can scrub to get rid of dirt. Finally, rinse the tap with warm water.

All you need is ½ cup of baking soda, ½ cup of Borax, ½ cup of sea salt, and 15 drops of an essential oil such as grapefruit essential oil. You may have some left over, but you can keep it in a bottle and use it at a later time.

11. Lemon Scrub:

This scrub is very effective and simple because it consists of two components, lemon and coarse salt, and you can use it to make a tap-cleaning scrub easily. Once the lemon is cut into two parts, sprinkle coarse salt on one half. You can apply more salt to the lemon as needed. Lemon with salt helps get rid of the dirt and unpleasant odors accumulated in the tap.

 12. Baking soda and hydrogen peroxide:

One of the old faucet cleaners is a mixture of baking soda with hydrogen peroxide and some other elements. It helps you clean everything, even bathroom tiles, and you can prepare it yourself at home. In the event that the faucets are very dirty, you can try this mixture

Mix 1/2 cup of baking soda, 1/4 cup of liquid soda, and 1 tablespoon of hydrogen peroxide and mix them well together in a bowl. And start using it to clean the faucet effectively.

13. Cleaning spray:

If you need a quick cleaning product that doesn’t just use water, you can try these ingredients together and put them together in a spray bottle. There are two options when it comes to cleaning the faucet at home and they are to combine vinegar and castile soap and use them to clean the faucet well.

Mix castile soap with 2 cups of water and 1/2 cup of liquid soap, 15 drops of essential oil, 1 spray bottle, vinegar for cleaning surfaces, 1 cup of water, 1 cup of white vinegar, 1/2 lemon juice, combine them together in a spray bottle to enjoy perfect results. .

14. Hot water:

Hot water is one of the traditional methods of cleaning faucets, and you can rely on it on an ongoing basis, especially when the faucets suffer from clogging. Boiling water is the ideal solution, but you should be careful about the temperature of the water because if the water temperature is too high and you have plastic pipes it can damage them. By simply massaging the faucet and its filter with hot water, it helps you add shine to the faucet.

15. Baking soda with lemon juice:

Lemon juice has a great smell and as we mentioned above, you can use it to effectively clean the faucet and it gives the same effect as vinegar because it is acidic and even gives a pleasant smell to the faucet. Mixing equal amounts of baking soda with lemon juice helps clean the faucet.

Cleaning the faucet with pictures:

Cleaner.

Water .

plastic bag .

Rubber glove.

Cotton cloth.

Fill a plastic bag with detergent with 1 amount of water. You can add the amount of water as needed, secure the faucet using a rubber band and leave it for a few hours. Now the faucet in front of you will look shiny and shiny.